Preowned McIntosh MC1201 Monoblock Amplifier Pair

$15,000.00

Lovingly preowned pair of McIntosh MC1201 Monoblock Power Amplifiers.

1200 watts of McIntosh pure power and sonic bliss. Original boxes and single manual included!

Full specs:

Solid-state monoblock power amplifier with output load impedance terminals for 8, 4, and 2 ohms. Output power: 1200W into 8, 4, or 2 ohms (30.8dBW, 27.8dBW, 24.8dBW, respectively), minimum sinewave continuous average power output rated 20Hz-20kHz.
Output RMS voltage: 98V across 8 ohms, 69.3V across 4 ohms, 49V across 2 ohms. THD: 0.005% maximum from 250mW to rated power output. Intermodulation distortion: SMPTE 0.005% maximum if instantaneous peak power output does not exceed twice the output power rating.
Dynamic headroom: 2.1dB. Frequency responses: 20Hz-20kHz, +0/-0.25dB; 10Hz-100kHz, +0/-3.0dB. Input sensitivity: 2.45V unbalanced, 4.9V balanced.
Signal/noise ratio: 93dB, A-weighted, unbalanced (120dB below rated output), 97dB balanced (124dB below rated output).
Damping factor: 8 ohm output, !w100. Input impedance: 10k ohms. Power Guard: <2% THD with 14dB overdrive. Power requirements: 120V, 50/60Hz, 15A UL/CSA.
Store pick-up only.

Please call (619) 223-8151 before purchasing. Thank you!

Add To Cart

Lovingly preowned pair of McIntosh MC1201 Monoblock Power Amplifiers.

1200 watts of McIntosh pure power and sonic bliss. Original boxes and single manual included!

Full specs:

Solid-state monoblock power amplifier with output load impedance terminals for 8, 4, and 2 ohms. Output power: 1200W into 8, 4, or 2 ohms (30.8dBW, 27.8dBW, 24.8dBW, respectively), minimum sinewave continuous average power output rated 20Hz-20kHz.
Output RMS voltage: 98V across 8 ohms, 69.3V across 4 ohms, 49V across 2 ohms. THD: 0.005% maximum from 250mW to rated power output. Intermodulation distortion: SMPTE 0.005% maximum if instantaneous peak power output does not exceed twice the output power rating.
Dynamic headroom: 2.1dB. Frequency responses: 20Hz-20kHz, +0/-0.25dB; 10Hz-100kHz, +0/-3.0dB. Input sensitivity: 2.45V unbalanced, 4.9V balanced.
Signal/noise ratio: 93dB, A-weighted, unbalanced (120dB below rated output), 97dB balanced (124dB below rated output).
Damping factor: 8 ohm output, !w100. Input impedance: 10k ohms. Power Guard: <2% THD with 14dB overdrive. Power requirements: 120V, 50/60Hz, 15A UL/CSA.
Store pick-up only.

Please call (619) 223-8151 before purchasing. Thank you!

Lovingly preowned pair of McIntosh MC1201 Monoblock Power Amplifiers.

1200 watts of McIntosh pure power and sonic bliss. Original boxes and single manual included!

Full specs:

Solid-state monoblock power amplifier with output load impedance terminals for 8, 4, and 2 ohms. Output power: 1200W into 8, 4, or 2 ohms (30.8dBW, 27.8dBW, 24.8dBW, respectively), minimum sinewave continuous average power output rated 20Hz-20kHz.
Output RMS voltage: 98V across 8 ohms, 69.3V across 4 ohms, 49V across 2 ohms. THD: 0.005% maximum from 250mW to rated power output. Intermodulation distortion: SMPTE 0.005% maximum if instantaneous peak power output does not exceed twice the output power rating.
Dynamic headroom: 2.1dB. Frequency responses: 20Hz-20kHz, +0/-0.25dB; 10Hz-100kHz, +0/-3.0dB. Input sensitivity: 2.45V unbalanced, 4.9V balanced.
Signal/noise ratio: 93dB, A-weighted, unbalanced (120dB below rated output), 97dB balanced (124dB below rated output).
Damping factor: 8 ohm output, !w100. Input impedance: 10k ohms. Power Guard: <2% THD with 14dB overdrive. Power requirements: 120V, 50/60Hz, 15A UL/CSA.
Store pick-up only.

Please call (619) 223-8151 before purchasing. Thank you!